Click on the image to check the artwork
By certification 
F21-8s Industrial Radio Remote Controller used for bridge crane and overhead crane,easy to operate to keep workers safety.
products Application:
single speed hoist crane, and used for the industrial remote control which are under 11 connection
Brief Introduction
Transmitter size:239*65*65mm weight:255g
Receiver size:200*165*227mm weight:1400g
Specification:
control distance : up to 100m
unique code : over 4.3billon unique ID codes .
temperature : -35°C~+80°C
Enclosure protection class : IP65
Transmitter power: DC3v
Receiver powder : AC 380v/ 36v/220V or DC12V/24V
output capacity: Full sealed relay output with 5 amperes
Standard configuration:
One transmitter ;
One receiver;
One 1m cable connect with receiver
One operation and maintain manual .
products Features:
* 8 single speed push button + one EMGS button+one STOP button + one START button + one SWITCH key
* control points are up to 11
*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.
*with the Rotate key switch to guarantee the safety.
*set the internal functions by computer interface
*up/down ,east/west , south/ north push button can be set mutual inhibition or not .
*power button can be set start,speed up,jump strokes, ordinary etc.
*spare 1-2 key can be set ordinary, interlock,jump strokes,switch etc.
products Application:
single speed hoist crane, and used for the industrial remote control which are under 11 connection
Brief Introduction
Transmitter size:239*65*65mm weight:255g
Receiver size:200*165*227mm weight:1400g
Specification:
control distance : up to 100m
unique code : over 4.3billon unique ID codes .
temperature : -35°C~+80°C
Enclosure protection class : IP65
Transmitter power: DC3v
Receiver powder : AC 380v/ 36v/220V or DC12V/24V
output capacity: Full sealed relay output with 5 amperes
Standard configuration:
One transmitter ;
One receiver;
One 1m cable connect with receiver
One operation and maintain manual .
products Features:
* 8 single speed push button + one EMGS button+one STOP button + one START button + one SWITCH key
* control points are up to 11
*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.
*with the Rotate key switch to guarantee the safety.
*set the internal functions by computer interface
*up/down ,east/west , south/ north push button can be set mutual inhibition or not .
*power button can be set start,speed up,jump strokes, ordinary etc.
*spare 1-2 key can be set ordinary, interlock,jump strokes,switch etc.
